Purchasing a Power Deliver for your personal LED Strip Lights
If you’re buying LED Strip Lights don’t forget your power supply. LED Strip Lights count on a peripheral unit called a power, also referred to as a transformer or driver, which is needed to make them work.
Power supplies come in many shapes and sizes, which range from very basic ‘plug and play’ units to commercial style transformers which can be hardwired into your mains supply ecopac led driver. You will also hear these power supplies referred to as ‘transformers.’ The reason being along with powering the LED Strip Lights these units are designed to ‘transform’ the mains 230V AC to a low voltage 12V DC therefore making the supply applicable to the strip lights.
There are a few considerations you need to produce in regards to selecting the sort of power you need.
Firstly, do you wish to have the ability to plug right into a wall socket, or are you likely to hardwire your LED Strip Lights right into a light switch?
If the solution to the former question is ‘yes’ then you definitely will require a typical ‘plug and play’ driver. This is actually the most elementary supply available and allows quick and easy setup for standard domestic applications with a wall plug power source. The entire unit includes a black transformer, a kettle-lead with a typical UK mains 3-prong plug and a 12V male connector which attaches to the LED Strip with a corresponding female connector. The entire unit closely resembles a lap top charger and is all about 2 metres in length.
For more technical applications or where there’s no wall plug available an alternate mains power is available. In place of a kettle lead these supplies feature an amount of mains wire which can be wired directly up to the mains supply.
As well as choosing the sort of power, you will also need to find out the size of it. These supplies come in varying sizes, ranging anywhere from a low 20watts to many times this figure. These figures described the most ‘load’ that the supply can manage. The ‘load’ of one’s LED Strip Lights is calculated by taking the wattage per metre and multiplying it by the amount of metres you are using. For instance, if the wattage per metre is 7.2W and you are using 10 metres, then the complete load is 72watts. It is important to make sure that this load does not exceed the most load in your supply, otherwise you’ll experience performance issues with your strip lights, such as for instance voltage drop, and decrease the life span of one’s lights.
Leave a Reply